PRODUCTS

CIR 90-110mm Low Air Pressure DTH Hammer Bit

Code No.: CIR 90-110
Diameter: 90mm
Gauge Buttons: 6
Front Buttons: 6
Carbide Design: Ballistic
Face Design: Convex
Shank Type: CIR
CIR110-120mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR110-120
- Diameter: 120mm
- Gauge Buttons: 6
- Front Buttons: 6
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
CIR110-130mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR110-130
- Diameter: 110mm
- Gauge Buttons: 6
- Front Buttons: 6
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
CIR76-76mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR76-76
- Diameter: 76mm
- Gauge Buttons: 6
- Front Buttons: 6
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
CIR90 DTH hammer with sub top thread API 2-3/8″

High efficiency and tunable valved air cycle to optimize performance on your compressor. Many models also feature a heat resistant steel valve which keeps on working even in the most demanding quarry and mining applications.
CIR90 DTH hammer with sub top thread F48*N10

High efficiency and tunable valved air cycle to optimize performance on your compressor. Many models also feature a heat resistant steel valve which keeps on working even in the most demanding quarry and mining applications.
CIR90-100mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR90-100
- Diameter: 90mm
- Gauge Buttons: 6
- Front Buttons: 6
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
CIR90-90mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR90-90
- Diameter: 90mm
- Gauge Buttons: 6
- Front Buttons: 4
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
CIR90-95mm Low Air Pressure DTH Hammer Bit
- Code No.: CIR90-95
- Diameter: 95mm
- Gauge Buttons: 6
- Front Buttons: 4
- Carbide Design: Ballistic
- Face Design: Convex
- Shank Type: CIR
COD168-Permanent Concentric Casing System by DTH Hammer
- Code No.: COD168
- Casing O.D.: 168mm
- Casing Wall Max: 13mm
- Ring Bit I.D.: 125mm
- Ring Bit O.D.: 185mm
- Pilot Bit O.D.: 140mm
- DTH Hammer: 5”
- DTH Pipe: 76mm, 89mm
COD280-Concentric overburden drilling System by DTH Hammer

Code No. |-| COD280
Casing O.D. |-| 406mm
Casing I.D . |-| 382mm
Ring Bit O.D. |-| 440mm
Casing Shoe I.D.|-| 364mm
Pilot Bit O.D. |-| 140mm
DTH Hammer |-| 12”
DTH Pipe |-| 140mm
Cop1238-R38/T38-500 Shank Adapter, Striking Bar
- Code No.: Cop1238-R38-500
- Thread Type: R38
- Length: 500mm
- Rock Drill Type: Cop1238
- Rock Drill Manufacturer: Atlas Copco