Pneumatic (Steel) Chisel
- Tip Type:point/flat:
- Handle Material:Steel, 40cr:
- Use:Stone breaker:
- Size:32*160*370/400/430/600mm :
- 22*108*500mm:
Brief Introduction:
· The chisel can be used with pneumatic hammer and it is widely applicable and high efficient chiseling hole or demolition for concrete and rock.
· Our products include pointed chisel, flat chisel, spade chisel, gouge and groove chisel. The length of chisel can be selected according to customer’s requirements.
· Quality Assurance:All goods examined before delivery.
Application of TPB-60 machine
Related products
-
B87C pneumatic breaker (Paving Breaker)
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
weight : 39KG
length : 686mm
working air pressure : 0.63 Mpa
impact energy :100±10%J
impact power :1.8±10%KW
precussive frequency : 1200 B.P.M
air tube size : 10mm
bit head size : φ32*160mm
air inlet size : 3/4
-
B10 portable jack hammer
Model B10 portable jack hammer is the power of the broken tool. It uses the East Japan Air (TOKU) group with the mature technology of compressed air. It also can high-efficiency complete reinforced concrete. Rock , Asphalt etc, with the broken, more horsepower. The more high-efficiency, the longer life characteristics, especially suitable for big characteristics. The special thick, the broken objects. Hard work, is mine. The bridge, the road. Civil infrastructure project construction ideal tool!
-
SK-10 mini pneumatic air pick
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
