-
Hydro Bag
A complete Hydro-Bag equipment consists of:
1. Electric pump Hydro-Bag to create the pressure for the cushions
2. Safety valves and distribution valves;
3. Pipes, cocks and inlet filters; -
PD150 Piston Rock Splitter
Prodrill has been developing equipments in two categories: manual type and mechanical type. The manual type is light and handy enough for a man worker. The mechanical type […]
-
Piston Rock Splitter
- hole diameter：50MM，90MM,150MM
- depth：600－800MM,
- working pressure：100-120MPA
-
Plug and Feather Without Rubber for Saudi
Plug and feather, also known as plugs and wedges, feather and wedges, wedges and shims, pins and feathers and feather and tare, refers to a technique and a three-piece tool set used to split stone.
-
Pneumatic (Steel) Chisel
- Tip Type:point/flat:
- Handle Material:Steel, 40cr:
- Use:Stone breaker:
- Size:32*160*370/400/430/600mm :
- 22*108*500mm:
-
Quick Hitch
Advantages:
Prodrill quick hitch can be used on excavator to exchange accessories(such as breaker, ripper, compactor, grab bucket etc)easily and quickly, which has enlarged the use scope of an excavator.
Attaching quick hitch to an excavator take only one minutes, -
Shims and wedges with rubber clamp for granite splitting
Plug and feather, also known as plugs and wedges, feather and wedges, wedges and shims, pins and feathers and feather and tare, refers to a technique and a three-piece tool set used to split stone.
-
SK-10 mini pneumatic air pick
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
-
TCD-20 concrete breaker
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
-
TPB-40 air jack hammer
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
-
TPB-60 hand hold jack hammer
A pneumatic jackhammer, also known as a pneumatic drill or pneumatic hammer, is a jackhammer that uses compressed air as the power source. The air supply usually comes from a portable air compressor driven by a diesel engine. Reciprocating compressors were formerly used. The unit comprised a reciprocating compressor driven, through a centrifugal clutch, by a diesel engine. The engine’s governor provided only two speeds:
1.idling, when the clutch was disengaged
2.maximum, when the clutch was engaged and the compressor was running
3.wet weight 30KG,gross weight 40KG.
4.packing:76CM *48CM *21CM
-
TPB-90 pneumatic breaker hammer
Pneumatic pick is lighter, more flexible and convenient operation. It’s suitable for operation all around of work, especially in narrow space, upper or climbing direction. It […]
1
2